Experimental and numerical study of methylparaben decomposition in aqueous solution using the UV/H2O2 process

The present paper aims at presenting a kinetic model that is supposed to result in the decomposition of methylparaben in completely mixed batch reactor (CMBR) using the UV/H₂O₂ process. The proposed model incorporates photochemical, chemical reactions and their constant rates to formulate the overall kinetic rate expressions which are integrated into MATLAB. Thus, the changes in pH values during the process of oxidation are taken into consideration. In addition, the effects of hydrogen peroxide (HP) dosage, as well as the concentration of hydroxyl radicals, are examined. Accordingly, the pseudo-first-order rate constant, its variation as functions of HP concentration, incident UV-light intensity and the limitations of the adopted approach are discussed. In line with that, the authors provided evidence of the validity of the kinetic model through the exposure of previous experimental studies as reported in the literature review then through the evidence of the present experimental data.     

LCA comparison of container systems in municipal solid waste management

The planning and design of integrated municipal solid waste management (MSWM) systems requires accurate environmental impact evaluation of the systems and their components. This research assessed, quantified and compared the environmental impact of the first stage of the most used MSW container systems. The comparison was based on factors such as the volume of the containers, from small bins of 60–80 l to containers of 2400 l, and on the manufactured materials, steel and high-density polyethylene (HDPE). Also, some parameters such as frequency of collections, waste generation, filling percentage and waste container contents, were established to obtain comparable systems. The methodological framework of the analysis was the life cycle assessment (LCA), and the impact assessment method was based on CML 2 baseline 2000. Results indicated that, for the same volume, the collection systems that use HDPE waste containers had more of an impact than those using steel waste containers, in terms of abiotic depletion, global warming, ozone layer depletion, acidification, eutrophication, photochemical oxidation, human toxicity and terrestrial ecotoxicity. Besides, the collection systems using small HDPE bins (60 l or 80 l) had most impact while systems using big steel containers (2400 l) had less impact. Subsequent sensitivity analysis about the parameters established demonstrated that they could change the ultimate environmental impact of each waste container collection system, but that the comparative relationship between systems was similar.     

Diastereoisomer- and enantiomer-specific determination of hexabromocyclododecane in fish oil for food and feed

Fish oils are one of the main sources of ω-3 fatty acids. However, they can present elevated levels of some lipophilic pollutants, such as hexabromocyclododecanes (HBCDs). Since data about HBCDs in fish oil samples are very limited, in this study, 25 samples of fish oil for feed and food have been analyzed. Total HBCDs, as well as, α-, β- and γ-diastereoisomers have been determined. Total HBCDs ranged from 0.09 to 26.8 ng g⁻¹, with higher concentrations in fish oil for feed (average value of 9.69 ng g⁻¹) than those for food (1.14 ng g⁻¹). Concentrations of α-HBCD (average value of 4.12 ng g⁻¹ in feed samples and 0.48 ng g⁻¹ in food samples) and γ-HBCD (5.05 and 0.43 ng g⁻¹ respectively) were higher than that of β-HBCD (0.52 and 0.19 ng g⁻¹ respectively) in most of the samples. However, none of them was predominant in the samples. Concentrations of HBCDs were compared to concentrations of other pollutants and correlation between dioxin and dioxin-like PCBs levels and HBCDs levels were observed. Intake of HBCDs was calculated for fish oil with human consumption purposes and it ranged from 0.08 to 5.38 ng HBCDs d⁻¹, which could contribute significantly to HBCDs total intake. Enantiomeric fractions were also determined. No clear enrichment was observed for γ-HBCD, while (−)-α-HBCD enrichment was detected in some samples.     

Monitoring of heavy metal concentrations in home outdoor air using moss bags

One monitoring station is insufficient to characterize the high spatial variation of traffic-related heavy metals within cities. We tested moss bags (Hylocomium splendens), deployed in a dense network, for the monitoring of metals in outdoor air and characterized metals’ long-term spatial distribution and its determinants in Girona, Spain. Mosses were exposed outside 23 homes for two months; NO₂ was monitored for comparison. Metals were not highly correlated with NO₂ and showed higher spatial variation than NO₂. Regression models explained 61-85% of Cu, Cr, Mo, Pb, Sb, Sn, and Zn and 72% of NO₂ variability. Metals were strongly associated with the number of bus lines in the nearest street. Heavy metals are an alternative traffic-marker to NO₂ given their toxicological relevance, stronger association with local traffic and higher spatial variability. Monitoring heavy metals with mosses is appealing, particularly for long-term exposure assessment, as mosses can remain on site many months without maintenance.     

Year-round reproduction in a seasonal sea: biological cycle of the introduced ascidian Styela plicata in the Western Mediterranean

The widely introduced ascidian Styela plicata is very common in the Western Mediterranean, an area that can act as a source for secondary introductions due to its high shipping activity. In order to understand the potential of this species to colonize new habitats, its reproductive features were assessed in the Western Mediterranean by means of monthly monitoring of two populations (Vilanova i la Geltrú 41°12′53″N, 1°44′11″E; Blanes 41°40′29″N, 2°47′56″E) from January 2009 to December 2010. The reproductive activity of this species was assessed through gonad histology and a gonad index. Population size-structure was measured monthly in order to study recruitment dynamics. No clear seasonal pattern was observed, and mature gametes and recruits were present all year long. Spawning was potentially continuous, although it seemed punctuated with pulses of gamete release, particularly in spring. A prolonged reproductive period is likely to confer a competitive advantage on S. plicata in temperate seas, where most species reproduce seasonally, and may promote recurrent introductions as larvae are available for settlement on transport vectors over much of the year.     

The potential leaching and mobilization of trace elements from FGD-gypsum of a coal-fired power plant under water re-circulation conditions

Experimental and geochemical modelling studies were carried out to identify mineral and solid phases containing major, minor, and trace elements and the mechanism of the retention of these elements in Flue Gas Desulphurisation (FGD)-gypsum samples from a coal-fired power plant under filtered water recirculation to the scrubber and forced oxidation conditions. The role of the pH and related environmental factors on the mobility of Li, Ni, Zn, As, Se, Mo, and U from FGD-gypsums for a comprehensive assessment of element leaching behaviour were also carried out. Results show that the extraction rate of the studied elements generally increases with decreasing the pH value of the FGD-gypsum leachates. The increase of the mobility of elements such as U, Se, and As in the FGD-gypsum entails the modification of their aqueous speciation in the leachates; UO₂SO₄, H₂Se, and HAsO₂ are the aqueous complexes with the highest activities under acidic conditions. The speciation of Zn, Li, and Ni is not affected in spite of pH changes; these elements occur as free cations and associated to SO₄² in the FGD-gypsum leachates. The mobility of Cu and Mo decreases by decreasing the pH of the FGD-gypsum leachates, which might be associated to the precipitation of CuSe₂ and MoSe₂, respectively. Time-of-Flight mass spectrometry of the solid phase combined with geochemical modelling of the aqueous phase has proved useful in understanding the mobility and geochemical behaviour of elements and their partitioning into FGD-gypsum samples.     

The potential leaching and mobilization of trace elements from FGD-gypsum of a coal-fired power plant under water re-circulation conditions

Experimental and geochemical modelling studies were carried out to identify mineral and solid phases containing major, minor, and trace elements and the mechanism of the retention of these elements in Flue Gas Desulphurisation (FGD)-gypsum samples from a coal-fired power plant under filtered water recirculation to the scrubber and forced oxidation conditions. The role of the pH and related environmental factors on the mobility of Li, Ni, Zn, As, Se, Mo, and U from FGD-gypsums for a comprehensive assessment of element leaching behaviour were also carried out. Results show that the extraction rate of the studied elements generally increases with decreasing the pH value of the FGD-gypsum leachates. The increase of the mobility of elements such as U, Se, and As in the FGD-gypsum entails the modification of their aqueous speciation in the leachates; UO₂SO₄, H₂Se, and HAsO₂ are the aqueous complexes with the highest activities under acidic conditions. The speciation of Zn, Li, and Ni is not affected in spite of pH changes; these elements occur as free cations and associated to SO₄ ² in the FGD-gypsum leachates. The mobility of Cu and Mo decreases by decreasing the pH of the FGD-gypsum leachates, which might be associated to the precipitation of CuSe₂ and MoSe₂, respectively. Time-of-Flight mass spectrometry of the solid phase combined with geochemical modelling of the aqueous phase has proved useful in understanding the mobility and geochemical behaviour of elements and their partitioning into FGD-gypsum samples.     

Ammonia emissions from the composting of different organic wastes. Dependency on process temperature

Ammonia emissions were quantified for the laboratory-scale composting of three typical organic wastes with medium nitrogen content: organic fraction of municipal solid wastes, raw sludge and anaerobically digested sludge; and the composting of two wastes with high nitrogen content: animal by-products from slaughterhouses and partially hydrolysed hair from the leather industry. All the wastes were mixed with the proper amount of bulking agent. Ammonia emitted in the composting of the five wastes investigated revealed a strong dependence on temperature, with a distinct pattern found in ammonia emissions for each waste in the thermophilic first stage of composting (exponential increase of ammonia emitted when increasing temperature) than that of the mesophilic final stage (linear increase of ammonia emissions when increasing temperature). As composting needs high temperatures to ensure the sanitisation of compost and ammonia emissions are one of the main environmental impacts associated to composting and responsible for obtaining compost with a low agronomical quality, it is proposed that sanitisation is conducted after the first stage in large-scale composting facilities by a proper temperature control. CAPSULE: Ammonia emission pattern and correlation with process temperature are presented for the composting process of different organic wastes.     

Immobilization of heavy metals in polluted soils by the addition of zeolitic material synthesized from coal fly ash

The use of zeolitic material synthesized from coal fly ash for the immobilization of pollutants in contaminated soils was investigated in experimental plots in the Guadiamar Valley (SW Spain). This area was affected by a pyrite slurry spill in April 1998. Although reclamation activities were completed in a few months, residual pyrite slurry mixed with soil accounted for relatively high leachable levels of trace elements such as Zn, Pb, As, Cu, Sb, Co, Tl and Cd. Phytoremediation strategies were adopted for the final recovery of the polluted soils. The immobilization of metals had previously been undertaken to avoid leaching processes and the consequent groundwater pollution. To this end, 1100 kg of high NaP1 (Na6[(AlO2)6(SiO2)10] .15H2O) zeolitic material was synthesized using fly ash from the Teruel power plant (NE Spain), in a 10 m3 reactor. This zeolitic material was manually applied using different doses (10000-25000 kg per hectare), into the 25 cm topsoil. Another plot (control) was maintained without zeolite. Sampling was carried out 1 and 2 years after the zeolite addition. The results show that the zeolitic material considerably decreases the leaching of Cd, Co, Cu, Ni, and Zn. The sorption of metals in soil clay minerals (illite) proved to be the main cause contributing to the immobilization of these pollutants. This sorption could be a consequence of the rise in pH from 3.3 to 7.6 owing to the alkalinity of the zeolitic material added (caused by traces of free lime in the fly ash, or residual NaOH from synthesis).